Scott enjoys hobbies. I was over the whole “motorcycle” thing, and he had been dreaming of building a small sailboat for a few years. We compromised and decided if he sold the motorcycle to pay for the kit to build a sailboat, I wouldn’t complain.
He wanted a boat that was large enough to fit the 4 of us, but small enough it didn’t require a full trailer. Ultimately after a lot of research, he opted to build a Northeastern Dory, and purchased a ‘kit’ from Chesapeake Light Craft.
- Building a boat is not for the faint of heart.
- It is not for a novice woodworker (even though you can buy it as a ‘kit.’)
- Building a boat is not for an impatient person.
Those are my disclaimers.
The end of November 2013, the long awaited kit arrived:
Scott immediately got to work gluing (with epoxy) the puzzle piece lengths together:
A boat shaped started to take form:
his is a ‘stitch and glue’ build. Meaning, the wood is a thin plywood, that can bend and you stitch it in place with wire. While the wires hold the wood together, you then epoxy the wood. Once the epoxy is dried, you clip the staples / wires and they aren’t visible anymore.
The progress wasn’t as ‘visible’ from this point on, until the end. Lots of meticulous sanding and gluing… (hence all those clamps!)
Building the seats. Using a ‘spokeshave’ to get a nice beveled edge on the lip of the seat for added comfort:
All complete! Set sail in May 2014.
Scott worked a little on the boat almost everyday, from January – May.
It really is a lot of fun. Sailing if there is wind, rowing if it is calm.
We are able to pick the boat up and carry it to the waters edge with 2 people. I wouldn’t say it is “light” but it is manageable with 2 men. 1 man and 1 woman – it’s pretty heavy. But, the boys help on my end and we make it work.