Update your floor vents

header

Brass isn’t my favorite.  Our house unfortunately has a lot of it.  It clashes with the wood floor in my opinion.  I decided a mini makeover might do wonders.  I started looking online and was surprised to find that floor vents are quite expensive!  If you want something other than the ordinary metal slats kind.  I like the style of mine, just not the brass finish.

Therefore, I opted for the fast spray paint method.

This was such a fast and easy revamp of the floor vents!  And, it makes such a difference!  They now are a nice contrast to my wood floor rather than a clashing contrast.

1.  Remove floor vents.

2.  Clean them of all dust and crumbs and hair and gross stuff.

3.  Lightly sand the surface.  This will help prepare the surface to better accept the paint, and not scratch off as easily later.  I used 120 grit sandpaper, and then a metal wire brush after the sandpaper.sanding_vents

4.  Wash and dry the vent.  You want to remove all dust to get a nice smooth finish.

5.  I put paper inside my vents so the vents_paperoverspray wouldn’t go down into the rest of the vent as mine open and close and I didn’t want the paint to interfere with that.

6.  Apply the spray paint.  Follow the direction on the can.  It says multiple light coats a few minutes apart is better than one heavy coat, so that’s what I did.  Spray, come inside and fold a load of laundry.  Spray.  Empty the dishwasher.  Spray, check my email…

7.  Dries to the touch in 30 minutes – 1 hour.

finish_vents8.  Replace vent cover and admire your handiwork!  The pictures might not show it very well, but the oil rubbed bronze (metallic) finish is really cool.  Has just a few flecks of the bronze in there when the light hits it right.  It’s not just a matte black.  Which, I didn’t want.

before_after1updated_floor_vents_mancaveinvaded

really like the color and the overall finish of this spray paint.

spray_paint

COVERAGE:
I was able to complete 8 floor vents with one can of spray paint that cost me $7.00.  Not bad!

SUPPLIES NEEDED:
Floor vents
Sandpaper (120 grit)
Wire Brush (or 000 Steel wool)
Rustoleum metallic paint & primer in one – OIL RUBBED BRONZE
Rag to clean off dust
Soap / Water to wash vents
Paper (optional)